Dom's 1970 Chevrolet Chevelle SS Hard Top, as seen in the 2009 movie Fast & Furious. Solid Chevy muscle through and through. Great little model. Approx. 11.5cm x 5cm (4.5" x 2"). Comes with an acrylic display case.

Chevrolet triple pack, consisting of: 1 x 1969 Yenko Chevelle (approx. 7.5cm long), 1 x 1971 Cheyenne truck with towbar (approx. 8.5cm long); 1 x dual-wheel flatbed trailer (approx. 10.5cm long). All set to transport the Chevelle to the show. Trailer comes with fold-up ramps. Chevelle comes with an informative "Trading Card". Great Chevy triple pack.

London Fire Brigade Merryweather AEC Regent III Fire Engine. It could be operated with either a wheel escape ladder (large fires) or 35 ft extension ladder (smaller fires). Both of these options are included with the model. It was the first post war diesel fire engine and had the ability to pump 1000 gallons a minute from its midship pump. Beautifully detailed little model. Approx. 10cm x 3cm x 5cm (4" x 1.25" x 2"). Comes with an acrylic display case.

AEC Regent III Fire Engine of the Newcastle & Gate Fire Brigade. This is a beautiful little model, with a stunning colour scheme. Approx. 10cm x 3cm x 4.5cm (4" x 1.25" x 1.75"). Comes in an acrylic display case. Great for fire engine collectors and OO scale railway modellers.

Dom's 1993 Mazda RX-7 from the 2001 film "The Fast and the Furious". Pretty good graphics. Approx. 9cm x 4cm x 3cm (3.5" x 1.5" x 1.25"). Comes mounted on a plinth in an acrylic display case.

Associated Equipment Company (AEC) Matadors were originally built as artillery tractors in WW2. In post-war civilian life they were used in a variety of roles such as general commercial vehicles and wreckers. Their good off-road performance also saw them used in the forestry industry. Approx. 7.6cm x 2.5cm x 5.7cm (3" x 1" x 2.25"). Suitable to accompany OO Scale railway collections. Comes in an acrylic display case.

Muscle car triple pack, consisting of: 1 x 1969 Dodge Charger Daytona (approx. 8.5cm long), 1 x 1969 Dodge Charger R/T (approx. 8cm long); 1 x 1970 Plymouth Hemi Cuda (approx. 7cm long). Really cool models. The Charger R/T and Cuda each come with an informative "Trading Card". Another choice muscle triple pack.

The 1970's produced some pretty groovy auto's. This "Hip" trio includes: 1 x 1970 Chevrolet C-10; 1 x 1971 AMC Javelin AMX; and 1 x 1976 Dodge B-100 Street Van. You can just smell the 70's man! Each model approx. 8cm long.

Tandem trailer with folding ramps and functional jack. A great low cost option for displaying your precious towed load. NOTE: Trailer does not necessarily directly attach to all 1/18 models. Approx. 24cm x 11.5cm (9.5" x 4.5").

Volkswagen Type 2 (T1 generation) dual cab utility pickup. It's what we call a ute mate! VW T platform Transporters were produced for 60 years, and the Type 2 T1 was available from 1950 to 1967. Other variants included vans, minivans, minibuses, and campervans, making it (to date) the best-selling van in history. Metal diecast with some plastic parts. Opening tailgate. Approx. 17cm x 6.5cm x 6.5cm (6.5" x 2.5" x 2.5").

If you like machinery, lots of steel, and a bit of rustic agricultural charm, then this is the beast for you. Powered by a large bore two-stroke single cylinder engine with a hot pre-combustion chamber (hot bulb), the Super Landini was used for extensive land reclamation work in Italy in the 1930's. A great little model. Approx. 7cm x 4cm x 4.5cm. Comes in an acrylic display case.

Dodge Challenger R/T Hard Top. Detailed diecast metal collectible model car, with some plastic parts. Yellow with black stripes, and chrome accents. Nice wheel detail. Comes in an acrylic dispaly case. An eye-catching addition to any 1/43 collection. Looks great Approx. 11cm x 4.5cm (4.25" x 1.75").

1969 Ford F-350 Ramp Truck and Shelby Cobra in Terlingua Racing Team livery. The team and logo made famous by Carroll Shelby and friends. HD Trucks Series 11 Limited Edition. Comes with loading ramps. Truck approx. 11cm (4.25") long. Cobra approx. 6cm (2.375") long.

RAM MOPAR double set consisting of: 1 x 2017 RAM 2500 and 1 x 2017 RAM 1500. Each model approx. 9.5cm long. Thank you Ma'am!!

2017 International WorkStar Construction Dump Truck. SD Trucks Series 1, Limited Edition. With working dump bed. Approx. 12.5cm (5") long.

Hollywood Hitch & Tow. Gone in 60 Seconds. Triple set including 1 x 2015 Ford F-150, 1 x 1967 Custom Ford Mustang GT "Eleanor", and 1 x flatbed trailer.' 1967 CUSTOM MUSTANG - FLATBED TRAILER DIECAST

Mitsubishi Heavy Industries A6M2 Zero single-seat long range fighter, Model 11. Imperial Japanese Navy Air Service, 12th Kokutai, China. Designated as the Mitsubishi Navy Type 0 Carrier Fighter, or A6M Rei-sen. Usually referred to by its pilots as the "Reisen" (zero fighter), "0" being the last digit of the Imperial year 2600 (1940) when it entered service. The Allied reporting name was "Zeke", although the name "Zero" was later adopted by the Allies as well. Diecast metal model. Fixed cockpit canopy, no pilot figure. Some assembly required (prop, antennas, and landing gear). Landing gear can be shown up or down, and a display stand is included. This is a heavy model for its size, approx. 12cm x 16.5cm (4.75" x 6.5"). It comes from a budget range and is packaged in a blister pack.

Aichi D3A Type 99 Japanese carrier based twin seat dive bomber, IJN Akagi, Pearl Harbor, December 7, 1941. Allied reporting name "Val", the D3A was Japan's primary dive bomber and involved in almost all IJN actions. The first Japanese aircraft to bomb American targets in WWII, starting with Pearl Harbor and U.S. bases in the Philippines. Vals sank more Allied warships than any other Axis aircraft. Diecast metal model. Fixed cockpit canopy, no pilot figures. Some assembly required (prop, antennas, bombs, and landing gear). Landing gear can be shown up or down, and a display stand is included. This is a very heavy model, approx. 14cm x 19.5cm (5" x 7.75"). It comes from a budget range and is packaged in a blister pack.

VFM-224 USMC Guadalcanal 1942. Grumman F4F Wildcat WWII American carrier-based single-seat fighter. The Wildcat was the only effective fighter available to the US Navy and Marine Corps in the early part of the Pacific War. Diecast metal model. Fixed cockpit canopy, no pilot figure. Some assembly required (prop, antennas, and landing gear). Landing gear can be shown up or down, and a display stand is included. This is a heavy little model, approx. 11.5cm x 15.5cm (4.5" x 6"). It comes from a budget range and is packaged in a blister pack.

Imperial Japanese Navy Air Service Aichi B7A2 Ryusei (Shooting Star) twin-seat Torpedo Dive Bomber. Allied Reporting name "Grace". A large and powerful carrier-borne aircraft, but deprived of carriers to operate from. The type saw limited combat before the war ended in August 1945. Diecast metal model. Fixed cockpit canopy, no pilot figures. Some assembly required (prop, antennas, torpedo, and landing gear). Landing gear can be shown up or down, and a display stand is included. NOTE: The torpedo and centre stand, so if the torpedo is fitted, the model will need to be displayed with wheels down and on the ground. This is a very heavy model, approx. 15.5cm x 19.5cm (6" x 7.75"). It comes from a budget range and is packaged in a blister pack.

Grumman F6F Hellcat Fighter VF-24, USS Santee US Navy. American carrier-based single-seat fighter. Replaced the F4F Wildcat to meet the challenge of Japan's A6M Zero. Bigger and faster than the Wildcat, the Hellcat was one of America’s most successful WWII aircraft. It quickly became the U.S. Navy and Marine Corps primary fighter in the Pacific war. Diecast metal model. Fixed cockpit canopy, no pilot figure. Some assembly required (prop, antennas, and landing gear). Landing gear can be shown up or down, and a display stand is included. This is a very heavy model, approx. 13.5cm x 17.5cm (5.25" x 6.75"). It comes from a budget range and is packaged in a blister pack.

Bedford OB MUA346 from the Great British Buses collection. Finished in the colours of Wallace Arnold Tours Limited, Leeds, Bradford, Scarborough. A beautiful little bus. Approx. 10cm x 3cm x 3.5cm (4" x 1.25" x 1.375"). Comes mounted on a plinth.

Highwayman Low Loader. Bonneted 4x2 motive unit, finished in Wynns Heavy Haulage livery. The original featured a fibreglass cab with wraparound windscreen, Leyland engine, gearbox, and axles. Approx. 17.8cm x 2.8cm x 3.3cm. Comes with an acrylic display case.

Bedford TK Fire Engine of the Mid and West Wales Fire and Rescue Service. This TK , based on a Carmichael body, is typical of many that saw service as fire engines. A faithfully reproduced classic! Approx. 9cm x 2.5cm x 4cm (3.5" x 1" x 1.5"). Comes in an acrylic display case.